Bildgalleri
(1/4)
Toshiba P300 2 TB
Säljes
400 kr
Frakt från 39 kr + köpskydd 50 kr
Trygga affärer med Frakt med köpskydd
Efter leveransen har du 24 timmar på dig att inspektera varan. Om något är fel med den får du pengarna tillbaka
Skapa ett paket
Köp fler varor från säljaren och betala bara för frakten en gång.
Varubeskrivning
Skick: Bra skick - varsamt använd
Toshiba P300 2 TB, 3,5" SATA, 7200 rpm, CMR – testad och raderad
En snabb och pålitlig 2 TB-disk. Den passar bra som lagringsdisk i en stationär dator, som spel- eller mediabibliotek, eller som extra disk i en hemserver eller NAS. Disken använder CMR-teknik, vilket ger jämn skrivprestanda och fungerar bra i RAID, till skillnad från många billigare diskar som använder SMR.
Disken har suttit i en hemserver och lagrat filer. Den har inte används till någon tung skrivning.
Testad och klar att använda:
SMART-status: PASSED
0 omallokerade, väntande eller oläsbara sektorer, alltså inga dåliga sektorer
Hela disken har skrivits över med nollor och sedan lästs tillbaka och kontrollerats, 2 TB utan ett enda läs- eller skrivfel
Den är helt tom, utan filsystem, så du formaterar den själv
Specifikationer:
Modell: Toshiba P300 HDWD120 (2 TB)
7200 rpm, 64 MB cache, SATA 6 Gb/s
CMR (ingen SMR)
Tillverkad maj 2019
Drifttid: ca 11 000 timmar
Öppet redovisat: SMART-loggen visar 3 gamla kabelfel (CRC) som inträffade vid ett och samma tillfälle för länge sedan, troligen när en SATA-kabel satt dåligt. Felen kommer från anslutningen, inte från diskens yta, och inga nya fel har tillkommit sedan dess. Hela ytan har lästs utan fel.
Disken skickas väl förpackad i bubbelplast.
smartctl 7.4 2023-08-01 r5530
=== START OF INFORMATION SECTION ===
Model Family: Toshiba P300 (CMR)
Device Model: TOSHIBA HDWD120
Firmware Version: MX4OACF0
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5625
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Sep 30 2026
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14248) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 238) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 141 141 054 Pre-fail Offline - 64
3 Spin_Up_Time 0x0007 253 253 024 Pre-fail Always - 45 (Average 45)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2905
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 11095
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1317
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 2911
193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 2911
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 14/45)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 3
SMART Error Log Version: 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 occurred at disk power-on lifetime: 10831 hours (451 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 07 00 00 00 Error: ICRC, ABRT at LBA = 0x00000007 = 7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 b0 00 00 00 40 00 00:01:10.642 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:01:10.642 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:01:10.642 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:01:10.641 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:01:10.640 SET FEATURES [Set transfer mode]
Error 2 occurred at disk power-on lifetime: 10831 hours (451 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 07 00 00 00 Error: ICRC, ABRT at LBA = 0x00000007 = 7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 c0 00 00 00 40 00 00:01:10.302 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:01:10.299 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:01:10.299 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:01:10.298 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:01:10.298 SET FEATURES [Set transfer mode]
Error 1 occurred at disk power-on lifetime: 10831 hours (451 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:00:02.889 IDENTIFY DEVICE
00 08 01 01 00 00 a0 ff 3d+19:44:13.562 NOP [Reserved subcommand] [OBS-ACS-2]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Användarprofil
Du måste vara inloggad för att se användarprofiler och skicka meddelanden.
Annonsens metadata
Senast ändrad: 2026-10-22 kl. 23:01 ・ Annons-ID: 27629548
