Bildgalleri
(1/4)
3D Skrivare Artillery X1 310x310x400mm
Såld
Säljes
950 kr
Varubeskrivning
Skick: Bra skick - varsamt använd
Artillery X1
Print volume 310x310xx400mm
Mods:
- BL touch
- Klipper firmware
- Magnetic PEI spring steel build plate
If you need a Raspberry PI to run e.g. mainsail / fluidd, I can sell a RPi separately with a ready klipper configuration for this printer. Add RPi 3B for +275kr.
Note following about Klipper:
The Klipper firmware pros and cons:
+ better print quality
+ supports input shaping
+ easy configuration updates
+ web-based control
- requires extra hardware. It requires an active host computer such as raspberry Pi (available separately) or a PC.
- initial installation and tuning can be overwhelming for beginners
- no standalone printing from SD card or USB-stick
- the touchscreen of the printer cannot be used with Klipper at all (the screen itself works, but works only if you restore the original firmware)
The price does not include technical support and the printer is sold 'as is'. You will not be able to print with it without a klipper-host PC/Raspberry Pi. Do not buy this if you don't know what you are doing.
Pickup: Skarpnäck, Stockholm
Obs: Knappen för att visa hela beskrivningen har bara en visuell effekt.
Användarprofil
Du måste vara inloggad för att se användarprofiler och skicka meddelanden.
Logga inAnnonsens metadata
Senast ändrad: 2026-06-16 kl. 18:09 ・ Annons-ID: 23875969
