Bildgalleri
(1/2)
Siemens KNX Universal dimmer 2 x 300 VA, AC 230 V
Säljes
Kan skickas
1 000 kr
Frakt från 39 kr + köpskydd 73 kr
Trygga affärer med Frakt med köpskydd
Varan skickas till dig. Du har 24 timmar på dig att kontrollera varan innan pengarna överförs till säljaren.
Varubeskrivning
Skick: Nytt skick - helt ny
Helt ny i kartong.
Beskrivning:
Two outputs for switching and dimming resistive, inductive or capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V
Rated frequency 50 / 60 Hz
Rated power at +35°C ambient temperature: 300 VA per output or 500 VA for single output usage, without any minimal load per output
Electronic protection of each output against overload, short circuit and temperature rise
Screw terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 ... 2.5 mm²
Bicolor LED for indicating the switch status (red = on, green = off) or an error (orange, blinking) per output
Bus-powered electronics
Integrated bus coupling unit, bus connection via bus terminal block
Device for DIN-rail mounting on a TH35 mounting rail according to DIN EN 60715
Additional functionalities GAMMA
Per output with selectable mode (normal mode, one- or two-level timer mode, blinking)
Adjustable ON- and OFF-delay
Separately adjustable dimming time from 0% to 100% for switching on/off and dimming brighte/darker
The ability to switch an output on or off by dimming brighter/darker
Adjustable dimming value when switching on
Immediate activation (jumping) or dimming to a new dimming value
Selectable additional status object switching and/or status object dimming value for each output
Additional object for each output for blocking/releasing the output
Sending of status objects on request and/or automatically after a change
Adjustable blocking time for sending status objects after restart and bus voltage recovery
Adjustable dimming value for each output in the event of bus voltage failure and recovery
Additional night mode object for time-limited switching on the output (and hence illumination) at night
Adjustable ON period at night or with timer mode
Selectable warning of imminent switching off the illumination by dimming to 50% of the previous dimming value during night mode or timer mode
Integrated 8-bit scene control and integration of each output in up to 8 scenes
Separately adjustable dimming time for scene control
Selectable counting of operating hours and with threshold monitoring of the operating hours
Selectable counting of load cycles and with threshold monitoring of the load cycles
Optional disabling of the ripple control compensation in an electrical grid with frequency fl uctuations
Building site function for switching the building site lighting on and off even if the bus devices have not yet been commissioned with ETS
Obs: Knappen för att visa hela beskrivningen har bara en visuell effekt.
Användarprofil
Du måste vara inloggad för att se användarprofiler och skicka meddelanden.
Logga inAnnonsens metadata
Senast ändrad: 8.11.2025 kl. 15:27 ・ Annons-ID: 18596077
